Home » » NVIDIA Gforce Go 6 and 7 Series Driver and Installation Guide

NVIDIA Gforce Go 6 and 7 Series Driver and Installation Guide

This tutorial will show you how to manually install the graphic Driver fo GeForce Go 6100 and 7000m.
Not necessarily for Presario F700 but to any model which use the same Hardware.

VALID for:

Nvidia go 6 and 7 Series

Before you try the manual installation method i suggest try to perform direct install first.

The drivers:

Nvidia Geforce go 7 and 6 series Windows 7 Driver
179.48_32bit
 179.48_64bit


THERE ARE 3 WAY TO INSTALL:
A: MANUAL INSTALLATION
B: FORCE INSTALL
C: MODED INF

--------------------------
A: INSTALLATION
-------------------------

After finish download and install you will get the nvdia driver folder at C:\NVIDIA

1.First open device manager by click start and  type devmgmt.msc as shown in the pictures below.

2.". Right-click on "video controller/ Standard VGA" and SELECT update driver.


3.Choose "Browse my computer for the Driver Software" .

4. Then select browse: Then browse to the Nvidia folder


5. Then click next, wait until it finish install and restart.

--------------------------------------
B: FORCE INSTALLATION.
------------------------------------------
If installing manually fail, we can try force installation.

1. Note that from STEP 4 in manual installation we select browse, this time select LET ME PICK A LIST OF DEVIC DRIVERS IN MY COMPUTER.

2. Select next and select have disk, browse to the C:\NVIDIA and select the INF file.
Continue with on screen instruction.

------------------
C: MODED INF
------------------
For modded INF:
(modded INF is at your own risk, This tutorial provide as information for me and others, if you perform this tutorial make sure you have the right to do so)

For GeForce Release 195.81, here 32bit and here 64bit
For GeForce Release 197.16, here 32bit and here 64bit

3-step process to install:
1. Download driver, double click and select extract,
2. Download modded INF and replace original INF in extracted folder(C:\NVIDIA)
3. Install & reboot.

If you have any question you can leave your comments.

0 comments:

Post a Comment

 
Support : Copyright © 2015. software architect - All Rights Reserved